產品列表
PROUCTS LIST
相關新聞
NEWS
相關文章
ARTICLE
QuixX系列皮秒半導體激光器的詳細資料：
QuixX® 半導體激光器的主要特性：
可同時輸出小于50ps和CW模式的激光。波長范圍從405nm到642nm可選，輸出平均功率大于300mW；脈沖模式下，峰峰抖動小于2ps；
皮秒半導體激光器用戶可自行調節脈沖形狀、脈沖高度和重頻等；
內置任意重頻發生器，重頻可調范圍從1Hz到100MHz；
自帶有延遲發生器輸出一個延遲可調的同步信號，最大延遲時間可達28ns@10ps的分辨率下；
光纖耦合效率。可以將激光器的色散消除以達到好的聚焦輸出，在自由空間模式下，可聚焦成近衍射極限的高斯光斑，可以實現高耦合效率光纖輸出。
皮秒半導體激光器產品參數：
| 型號 | 波長/功率 CW | 脈沖寬度 | 平均功率@40MHz | |
| 窄脈沖 | 窄脈沖 | |||
| 寬脈沖 | 寬脈沖 | |||
| 波長&功率（其他波長均可提供） | QuixX@375-70 PS | 375nm/70mW | <50ps | 0.6mW |
| <400ps | 2.4mW | |||
| QuixX@405-120PS | 405nm/120mW | <70ps | 1.0mW | |
| <500ps | 3.0mW | |||
| QuixX@405-300PS | 405nm/300mW | <90ps | 1.2mW | |
| <500ps | 4.0mW | |||
| QuixX@425-120PS | 425nm/120mW | <60ps | 0.7mW | |
| <500ps | 4.0mW | |||
| QuixX@445-100PS | 445nm/100mW | <80ps | 0.8mW | |
| <500ps | 4.0mW | |||
| QuixX@473-100PS | 473nm/100mW | <90ps | 0.75mW | |
| <700ps | 4.0mW | |||
| QuixX@488-60PS | 488nm/60mW | <90ps | 0.7mW | |
| <600ps | 4.4mW | |||
| QuixX@488-200PS | 488nm/200mW | <110ps | 1.3mW | |
| <550ps | 4.1mW | |||
| QuixX@515-80PS | 515nm/80mW | <110ps | 0.6mW | |
| <600ps | 1.6mW | |||
| QuixX@642-140PS | 642nm/140mW | <100ps | 2.8mW | |
| <1000ps | 10mW | |||
| 光束質量M2 | <1.15 | |||
| 橢圓度 | <1.1:1 | |||
| 偏振態 | >100:1 豎直 | |||
| 長時間穩定性 | <1%/8h | |||
| RMS 噪聲 | ||||
| 20MHz-100MHz | <0.5%(CW) | |||
| 10MHz-500MHz | <0.5%(CW) | |||
| 運行模式 | CW ACC | |||
| CW APC | ||||
| Picosecond Pulsed (LP – narrow pulse) | ||||
| Picosecond Pulsed (HP – wide pulse) | ||||
| Picosecond Pulsed (expert mode adj. between LP and HP) | ||||
| Analogue modulation (works for both CW and Picosecond Mode) | ||||
| Digital modulation (CW mode only) | ||||
| SYNC in (works for Picosecond Mode as external SYNC or gating input) | ||||
| Analogue + SYNC in (work for Picosecond Mode) | ||||
| 模擬調制 | >3MHz | |||
| 0～5V / 1,2kOhm or 0～1V / 50 Ohm (user selectable via software) | ||||
| 數字調制 | >1MHz digital modulation (CW) | |||
| up to 100MHz* for external triggering (SYNC in) | ||||
| 0～5V/TTL (200 Ohm), 0～1V/50 Ohm, -0.5～+0.5V/50 Ohm or (NIM)0～-1.6V/50 Ohm (user selectable via software) | ||||
| 激光使能（快門） | >200kHz (full ON/OFF) | |||
| 輸入信號 | TTL (2kOhm) | |||
| 上升下降時間 | Analogue: < 50ns | |||
| Digital: < 500ns | ||||
| Laser Enable: < 1000ns | ||||
| 消光比 | Analogue: >1000:1 | |||
| Digital: >1000:1 | ||||
| Laser Enable: infinite (full ON/OFF) | ||||
| 脈沖重頻： | From Single-Shot up to 100MHz* | |||
| 外部同步信號 | 0…500kHz in 1Hz steps | |||
| 內部信號 | 500kHz…80MHz in 500kHz steps | |||
| 內同步輸出延時 | 0ns～28.4ns pulse to sync delay in 10ps steps | |||
| 供電電壓 | 15～24 VDC nominal (14～25VDC max.) | |||
| 控制接口 | RS-232 and USB 2.0 | |||
| 尺寸 | 191x 65x 60mm | |||
| 選配 | BRIXX.PSU Power Supply unit | |||
| BRIXX.FASYADAP | ||||
| Fasy.xxxx | ||||
| BRIXX.HEATSINK | ||||
| XX.CDRH | ||||
激光控制軟件
| 如果你對QuixX系列皮秒半導體激光器感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系： |
上一篇：DualDiode雙管激光器
下一篇：BrixX系列半導體激光器
